Made in JAPAN
Shindy Products, Inc. has been proving to be successful in the industry for over 30 years. We use our expertise to manufacture Carburetor Repair Kits perfectly fitted to the OEM product. Trust only Shindy Products, Inc. for your Carburetor Repair Kits.
Float chamber gaskets need perfect seals to work properly.
Which would YOU trust?
Shindy and OEM have identical shapes and the thickness is within 0.05mm.
The float chamber gaskets are noticeably different for the other makers.
Main Jets need to be bored to the correct
dimensions with precise manufacturing. Shindy
ensures that our main jets install to the jet holder
smoothly by inspecting using a specially made thread
Shindy manufacturers conducted a main jet flow test
with Shindy main jets and other makersí main jets and
concluded that the flow is the same for Shindy and OEM
while the others have a higher flow rate.
Other makers have hole diameters that arenít straight
and will not function smoothly, while Shindy main jets
have precisely straight hole diameters.
Too much flow = no precision!
Jet needles controls idling and riding in low RPMS. Without accurate dimensions, stable idling is not
achieved. Shindy ensures precise measurements by vigorous inspections using latest imaging equipment.
Negative test results
Other makers tested negative on Diameter,
Taper angle, Length and Symmetry while Shindy
proved to be more precise.
Float valves are checked by Shindy manufacturers using air to go above and beyond for inspections. Air has smaller
particles than liquid and gives us more precise measurements to ensure the quality of our valves and proper control
to make sure the gas does not leak through.
Air screws are made with the highest quality material with no air pockets, making it most stable.
Slow jets are machined precisely identical to the OEM part with exact measurements of the vertical and horizontal
holes all matching to the original.
Jet needles are stamped with our unique code to make it easier to differentiate
from the OEM part when repairing the carburetor kit. Other makers stamp using
random numbers or the same numbers as OEM, creating confusion.
Trust the experts. Look for the Shindy package.
Our repair kits include: Needle jet, Idle adjuster set,
Throttle valve spring, Air jet, Drain screw and others as needed.